
Quick Compare
Product |
PowerWalker VFI 3000 ICT IoT Double-conversion (Online) 3 kVA 3000 W 9 AC outlet(s)
|
CyberPower OLS1500ERT2UA uninterruptible power supply (UPS) Double-conversion (Online) 1.5 kVA 1350 W 8 AC outlet(s)
|
PowerWalker VI 2000RT LCD 2 kVA 1800 W 9 AC outlet(s)
|
PowerWalker VFI 2000 ICR IoT Double-conversion (Online) 2 kVA 2000 W 8 AC outlet(s)
|
Availability |
|
|
|
|
Price |
€606.07
|
€614.90
|
€622.03
|
€625.53
|
Description |
||||
Cable length |
1.5 m | |||
Width |
192 mm | 438 mm | 438 mm | |
Height |
318 mm | 88 mm | 86.5 mm | |
Depth |
428 mm | 430 mm | 608 mm | |
Weight |
26.4 kg | 13.8 kg | 28.1 kg | |
Package height |
475 mm | 230 mm | ||
Package width |
590 mm | 540 mm | ||
Number of batteries supported |
6 | 4 | ||
Battery type |
12V / 7Ah | |||
Cables included |
Input power cable, Output power cable, USB cable | USB cable | ||
Storage relative humidity (H-H) |
10 - 90% | |||
Manual |
Yes | |||
Operating temperature (T-T) |
0 - 45 °C | 0 - 40 °C | ||
Operating relative humidity (H-H) |
0 - 95% | 20 - 90% | ||
Storage temperature (T-T) |
-20 - 50 °C | |||
Form factor |
Tower | Rackmount/Tower | Rackmount | |
USB port |
Yes | Yes | ||
LED indicators |
Yes | |||
Battery capacity |
9 Ah | |||
Battery recharge time |
3 h | 4 h | 4 h | |
Cooling type |
Active | |||
Output power |
3000 W | 1350 W | 1800 W | |
Input frequency |
40/70 Hz | 50/60 Hz | 50/60 Hz | |
USB 2.0 ports quantity |
1 | |||
Response time |
0 ms | 0 ms | ||
Display type |
LCD | LCD | LCD | |
Ethernet LAN (RJ-45) ports |
2 | |||
Number of battery cells |
6 | |||
Input operation voltage (min) |
160 V | 190 V | 154 V | |
Power protection features |
Overload | Overload | Short circuit | |
AC outlets quantity |
9 AC outlet(s) | 8 AC outlet(s) | 9 AC outlet(s) | |
Output power capacity |
3 kVA | 1.5 kVA | 2 kVA | |
Output operation voltage (max) |
240 V | 240 V | 240 V | |
Waveform |
Pure sine | Pure sine | ||
AC outlet types |
C13 coupler | C13 coupler | IEC 309 516C6 | |
Input operation voltage (max) |
300 V | 300 V | 288 V | |
Audible alarm(s) |
Yes | |||
Battery voltage |
12 V | 48 V | ||
Output operation voltage (min) |
200 V | 208 V | 220 V | |
UPS topology |
Double-conversion (Online) | Double-conversion (Online) | ||
Modem (RJ-11) ports |
2 | |||
Typical backup time at full load |
5.3 min | |||
Housing material |
Metal | |||
Typical backup time at half load |
15.3 min | |||
Surge protection |
Yes | |||
Output voltage regulation |
1% | |||
RS-232 ports |
1 | |||
Operating altitude |
0 - 1500 m | |||
Package dimensions (WxDxH) |
790 x 590 x 236 mm | |||
Serial interface type |
RS-232 | |||
Output frequency |
50/60 Hz | |||
Noise Level |
50 dB | 45 dB | 45 dB | |
Serial ports quantity |
1 | |||
Maximum current |
9 A | |||
Surge energy rating |
363 J | 430 J | ||
Power plug |
C20 coupler | C14 coupler | ||
Non-operating altitude |
0 - 1500 m | |||
Product colour |
Black | Black | Black | |
Harmonized System (HS) code |
85078000 | 8504408590 | 85078000 | |
Serial interface |
Yes | |||
ECO mode |
Yes | |||
Charging current |
1.5 A | 1.5 A | ||
Output voltage Total Harmonic Distortion (THD) |
1% | 5% | ||
Compliance certificates |
RoHS | |||
Audible alarm modes |
Alarm when on battery, Battery replacement, Fault, Low battery alarm, Overload alarm | |||
Replacement battery cartridge |
BPSE48V40ART2U | |||
Crest factor |
3:1 | 3:1 | ||
Emergency Power Off (EPO) |
Yes | Yes | Yes | |
Rack capacity |
2U | |||
EMI/RFI noise filtering |
Yes | |||
Output power factor |
1 | 0.9 | ||
Emergency Power Off (EPO) connector |
Yes | Yes | ||
Input power factor |
0.99 | 0.99 | ||
Built-in fan |
Yes | Yes | ||
Efficiency (ECO mode) |
95% | |||
Input current Total Harmonic Distortion (THD) |
5% | |||
Warnings |
Do not disassemble the unit housing, there may be a risk of electric shock. | Use the appliance in well-ventilated areas to avoid overheating. | ||