TRENDNET 8-Port Gigabit GREENnet Switch

Desktop/pedestal|24x10Base-T / 100Base-TX|2x10Base-T / 100Base-TX / 1000Base-T|PoE+ ports 24|Switching capacity 8.8 Gbps|Switching method Store-and-forward|Dimensions 440 × 180 × 44 mm|Unit Net Weight 2.37 kg

LANBERG switch PoE+ 24x 1GB 2x SFP 250W

TP-LINK Switch TL-SG1005P Unmanaged, Desktop, 1 Gbps (RJ-45) ports quantity 5, PoE ports quantity 4, Power supply type External

1xSFP|9x10/100/1000M|PoE+ ports 8|Switching capacity 20 Gbps|Forwarding rate 14.88 Mpps|Dimensions 209 × 126 × 26 mm|Unit Net Weight 1.4 kg

Desktop/pedestal|16x10Base-T / 100Base-TX|2x10/100/1000BASE-T/SFP combo|PoE+ ports 16|PoE power budget 192 Watts|Switching capacity 7.2 Gbps|Switching method Store-and-forward|Included Accessories Power Cable,Installation Guide|Dimensions 440 x 180 x 44mm|Unit Net Weight 2.7 kg

Type L3|Built-in management|5xSFP|4xSFP+|2xRJ45|PoE ports 1|Switching capacity 92 Gbps|Forwarding rate 1264 Mpps|Power supply External|Software included RouterOS level 5|Included Accessories 24V 1.2A power adapter, Rackmount Ears|Dimensions 200 x 166 x 45 mm|Unit Net Weight 0.9 kg

Desktop/pedestal|24x10/100/1000M|Switching capacity 8.8 Gbps|Forwarding rate 6.55 Mpps|Dimensions 440 × 300 × 44mm|Unit Net Weight 4 kg

Desktop/pedestal|Rack 1U|24x10Base-T / 100Base-TX / 1000Base-T|2xSFP+|PoE+ ports 16|PoE power budget 240 Watts|Switching capacity 88 Gbps|Dimensions 44 x 254 x 441.5 mm|Unit Net Weight 3.6 kg

5x10Base-T / 100Base-TX|Switching method Store-and-forward|Included Accessories Power Adapter;User Guide|Unit Net Weight 0.12 kg

netFiber 9 is a powerful outdoor switch with SFP, SFP+, and Gigabit Ethernet. It features a powerful ARM v7 CPU, 256 MB of RAM, 4x 10G SFP+ ports, and an advanced Marvell switch-chip that can handle even the heaviest loads. The Gigabit Ethernet port is not just for management purposes. It has a direct connection to the switch chip - so you can enjoy full gigabit speed. This port also supports PoE-in, so you don't have to rely on the DC jack for powering in tight, hard- to-reach spots.
There is a console port, followed by five regular SFP ports and four SFP+ ports for that sweet 10 Gbps networking. This means there might be quite a lot of wires for you to organize at some point. That's why was designed the case to have some handy little additional features on the bottom of the case to h

The TL-SG116E Unmanaged Pro switch is an ideal upgrade on unmanaged switches, suited for home and small business networks. A plug-and-play design makes for easy deployment without the need for a technician, while a robust metal casing provides better protection for components. Equipped with intelligent management features like QoS, VLAN, IGMP Snooping and more, this switch is effective in both simple and more demanding network environments.
TL-SG116E excels not only in simple plug-and-play networks but also in more demanding environments. Network monitoring enables users to observe traffic behavior. Port Mirroring, Loop Prevention and Cable Diagnostics allow connection problems on your network to be identified and located. Administrators can designate the priority of traffic based on P

Type L2 | 16x10/100M | 2xCombo 10/100/1000M-T/SFP | IEEE 802.3 | IEEE 802.3ab | IEEE 802.3af | IEEE 802.3at | IEEE 802.3u | IEEE 802.3x | IEEE 802.3z | Switching capacity 7.2 Gbps | Forwarding rate 5.3568 Mpps | Dimensions 440 mm × 300 mm × 44 mm | Unit Net Weight 3 kg

This switch is an indoor variation of the prominent netFiber 9 switch - used by many small and medium ISPs for reliable 10 Gigabit fiber connections stretching over a 100 meters. With five 1G SFP ports, four 10G SFP+ ports, and an additional Gigabit Ethernet port, this is the perfect upgrade for existing CRS212 setups. You're getting the modern ARM v7 CPU, a large capacity of RAM, and better cooling. The Marvell switch-chips bring phenomenal performance to the table!
The Gigabit Ethernet port has a direct connection to the switch chip - so you can enjoy full Gigabit speed there. And it supports PoE-in, giving you an additional powering option in tricky spots.
You can mount this switch in a standard 1U rack to keep everything organized. And it has all the power you would expect from

8x10Base-T / 100Base-TX / 1000Base-T | 2xSFP+ | Dimensions 272 x 216 x 50 mm | Unit Net Weight 0.7 kg

8xRJ45|IEEE 802.1p|IEEE 802.1Q|IEEE 802.3|IEEE 802.3ab|IEEE 802.3u|IEEE 802.3x|Forwarding rate 11.9 Mpps|Included Accessories Power Cord,Installation Guide,Resource CD,Rubber Feet|Unit Net Weight 0.5 kg